Hand built handrails, blacksmithed in Portland, OR
-Super sturdy, custom fabricated and blacksmithed, all TIG welded.
-Designed to withstand Portland’s exceptionally wet winters.
-Available with Lamb’s Tongue, Spiral, or “C” decorative ends.
DETAILS:
-Top rail material 1×1/2” x 1/2” solid flatbar steel.
-Post material 1×1/4” square tube steel with eighth inch wall welded on 3x3x3/16 base plate. Posts fully tig welded to provide airtight chamber which withstands moisture exceptionally.
-Rails are top-mounted with 3” square base plates with lag bolts on wood or concrete anchors.
-Finished in black powder coat (sand blasted, primed, top coat semi gloss black light texture) or shipped bare (reduces price).
-The max span between posts cannot exceed 63”. The max overall length of a two-post handrail will be 6’ 9”.
WHAT’S INCLUDED IN YOUR HANDRAIL KIT:
-Top rail with custom spaced post attachment tabs.
-Posts with baseplates and hardware.
-Baseplate template for drilling properly spaced hole pattern
-Lag bolts or concrete anchors
-Instructions and resources via phone or email 503-572-0743, alamedametalworks@gmaill.com
ORDERING YOUR HANDRAIL:
You will need to provide the nosing to nosing measurement of your stairs and the rise of 2 or more steps. Please see illustration in graphic below on how to find these measurements.
To order, contact us at:
REQUIREMENTS FOR INSTALLATION:
You will need to have the following tools:
-Level (you may be able to use your iphone!)
-Wrenches
-Rotohammer, drill, and bits for concrete, or drill and bit for wood installation.